TECHNICAL CHARACTERISTICS
DIGITAL PRINT ON GLASS TEMPERING, SODOCACIC SILICATE GLASS, THERMAL TEMPERATURE SAFETY GLASS
REF SAMPLE, CR FLOAT 3 a 15 mm
GLASS STAMPED AND CERTIFIED
BASIC PROPERTIES OF INKJET CERAMIC INKS
Thermal expansion coefficient
Firing temperature
Weathering test (UV ageing)

Condensation water test in constant atmospheres according to UNI 1036-1:2007

 

Purpose and range of application:

This test is carried out to investigate the behaviour of the samples in humid atmosphere and to indicate any defects of the protection of the specimen against corrosion.

Weathering test (UV ageing)
This test is carried out to investigate the behaviour of the samples in humid ambient atmospheres affected by UV radiation and to indicate the behaviour of the specimen against ageing .

Chemical Durability test
Purpose and range of application:
This test is carried out to investigate the behaviour of the samples under the attack of acid and alkaline chemical substances.
Acid resistance follows the example of DIN 12 116 and DIN EN 122. These tests specify a method for assessing the durability of the glass enamel against several acids which are used in commercial cleaners.

Also a determination of cold acid resistance according UNI 5717 has done.

Sulphide Resistance Test Method
Purpose and range of application:
ASTM C777-93 is designed to simulate the attack by a hydrogen sulphide atmosphere

Determination of the bending strength of glass
Purpose and range of application:
This test is carried out to determine the bending strength of enamelled glass, i.e. the applied tensile stress which leads to breakage of the glass.

Ball drop test on glass
Purpose and range of application:
This test is carried out to investigate the behaviour of toughened glass under impact of a hard object of small compact mass.

ACCORDING WITH UNI EN 1288-3:2001 (GLASS FOR BUILDING)